Skip to main content

Deck Stair Calculator

Enter your deck height to get the number of steps, the exact riser height, the total run, and the length and number of stringers, checked against the IRC stair limits.

Deck Height and Stairs

Ground or landing to the top of the deck boards, measured where the stairs will land

Nosing to nosing; two 5.5 in boards suit 10.5 to 11.25 in

At least 36 in (91 cm) under the IRC

Center to center; check your tread maker's span

How to Calculate Deck Stairs

Deck stairs start from one measurement: the total rise from where the stairs will land to the top of the deck boards. Everything else follows from it and the riser and tread sizes you choose.

  1. Risers: total rise divided by the tallest riser you allow, rounded up
  2. Riser height: total rise divided by the number of risers, so every step is the same
  3. Treads: one fewer than risers, because the deck is the top step
  4. Total run: treads times the tread run
  5. Stringer length: the diagonal, the square root of rise squared plus run squared
  6. Stringers: stair width divided by stringer spacing, rounded up, plus one

Worked Example: 30 Inch Deck

  • Risers: 30 / 7.5 = 4, each exactly 7 1/2 in
  • Treads: 3 at 10.5 inches, a total run of 31.5 inches
  • Stringer: square root of (30² + 31.5²) = 43.5 inches, cut from an 8 ft 2x12
  • Stringers for a 36 inch stair at 16 inches on center: 4

Deck Stairs by Deck Height

Risers of 7.5 inches or less and a 10.5 inch tread run.

Deck heightRisersRiser heightTreadsTotal runStringer
12 in26 in110.5 in15.9 in
18 in36 in221 in27.7 in
24 in46 in331.5 in39.6 in
30 in47 1/2 in331.5 in43.5 in
36 in57 3/16 in442 in55.3 in
42 in67 in552.5 in67.2 in
48 in76 7/8 in663 in79.2 in
60 in87 1/2 in773.5 in94.9 in
72 in107 3/16 in994.5 in118.8 in
96 in137 3/8 in12126 in158.4 in

Deck Stair Code Requirements

Most US towns build to the International Residential Code. Its stair section, R311.7, sets the limits this calculator checks:

  • Risers: 7 3/4 inches at most, within 3/8 inch of each other in a flight
  • Treads: at least 10 inches deep; under 11 inches they need a 3/4 to 1 1/4 inch nosing
  • Width: at least 36 inches
  • Flight: no more than 151 inches of rise between landings
  • Handrails: required on at least one side once a stair has four or more risers

Cut stringers lose depth at every notch. Deck guides commonly ask for at least 5 inches of solid wood below the notches of a 2x12, which this calculator reports. Local codes and inspectors have the final word.

Planning the Rest of the Deck

Count the deck surface with the deck board calculator, framing and posts with the deck calculator, and budget with the deck cost guide.

Frequently asked questions

See Your Deck and Steps on Your Own Home

Upload a photo and try deck materials and colors with AI

Try AI Design Tool